| Marine Refit & Paint
Enclosures |
|
|
 |
| Ft.
Lauderdale, Florida |
|
|
|
 |
| Ft
Lauderdale, Florida |
|
|
| Two
employees of Lauderdale Marine Center, Ft Lauderdale,
Florida USA apply bottom paint to a 110 ft. yacht.
This shelter is one of three paint/prep sheds they
have installed in this location. This size/type structure
was chosen by Lauderdale Marine Center for its ability
to accommodate their 200 ton Marine Travel Lift and
the ability to economically meet South Florida Building
Code 1997/1999 Broward Edition. In fact, this is the
first structure approved under this stringent code
requirement for this purpose. Mesh panels on each end
of this structure allow natural ventilation yet provide
a suitable environment for painting. |
| |
|
|
 |
| Fairhaven,
Massachusetts |
|
|
|
 |
| Port
Canaveral, Florida |
|
|
| Shipyard,
Fairhaven, Massachusetts USA. 2 ea. 36 ft. wide x 80
ft. long x 34 ft. tall. These two structures were installed
end to end to make up one 160 ft. long structure. In
the winter of 1999 the structure withstood a wind clocked
at 98 MPH. This structure is outfitted with a full
access front end panel, a solid rear end panel, and
two side mount personnel doors. |
|
This
is a smaller paint/prep shed installed in 1993. This
photo was taken after the unit was installed for 5
years. The customer installed fluorescent lighting
along the side of the unit for additional lighting
under the hull. This structure is a custom width of
34 ft. wide x 60 ft. long and 33 ft. tall. A 48 inch
ventilation fan was installed in the rear of the unit
to remove dust during the sanding process. |
| |
|
|
 |
| Florida |
|
|
|
 |
| Florida |
|
|
| Fiberglass
and Aluminum/Stainless Fabrication Shop: The customer
erected the structure in the summer of 2001 with the
assistance from one of our field representatives. |
|
The
installation period was 4 days and included the frame,
fabric, and ventilation system. The lighting was installed
by the customer at a later date. The system has exceeded
the customers expectations and increased the efficiency
of their employees. |
| |
|
|
 |
| Jeffersonville,
IN |
|
|
|
 |
| Jeffersonville,
IN |
|
|
| Barge
painting enclosure 60 ft. wide x 220 ft. long x 39
ft. tall installed on a 600 ft. long rail to index
to the next painting station. |
| |
|
|
|
