 |
| Arizona |
|
|
|
 |
| Classified |
|
|
| The
naturally dry climate in Arizona makes for ideal shade-only
work areas. Temperatures on equipment can be reduced by as
much as 90 degrees Fahrenheit by a shade hangar. Dimensions:
56ft wide x 30ft long x 16ft center height. |
|
FA-18
and Joint Strike Fighter Hangar 100% Sun Block. Air Force Desert
Sand Color. Ultra-heavyweight fabric for long lasting 20+ year
performance. 30 year frame warranty and 15 year fabric warranty.
Dimensions: 71ft. wide x 70ft. long x 25ft. center height. |
| |
|
|
 |
| Hawaiian
Islands |
|
|
|
 |
| Ohio |
|
|
This
shelter covers the dining and recreation area on a berthing
barge that is home to 100+ sailors. Over half of the shelters
we sell are designed for custom applications with custom sizes.
We can fabricate shelters to fit existing decks and work around
existing obstructions. We work from .dgn or .dxf CAD files
and can import almost any CAD format. If you do not have CAD,
simply sketch your site, and fax it to us at 850-584-7713.
We have even built shelters from drawings on napkins……From
concept to reality, we have the solution for your containment
needs.
Dimensions: 27ft wide x 60ft long x 12ft center height . |
|
Our
client had a need for temporary (several years) hangar space
to perform maintenance duties on the F-16 strike fighters.
The shelter was installed by military personnel with the technical
assistance from one Big Top representative. The installation
was substantially completed in 4 working days. The structure
was installed on an existing concrete pad with no site preparation.
The front door is electrically operated with the measurement
of 40ft wide x 20ft tall. Dimensions: 78ft wide x 80ft long
x 24ft center height. |
| |
 |
| Tres
Esquinas, Columbia |
|
|
|
 |
| Classified |
|
|
| This
relocatable hangar was designed to protect Apache and CH60
rotorwing aircraft along with their maintenance personnel,
from harsh weather and intense sunlight. Our structures reduce
temperatures on aircraft equipment up to 40 degrees Fahrenheit.
This building was outfitted with 2ea. 90 feet wide x 20 feet
tall winch up doors. The end panels were fabricated from a
mesh material that helps to naturally ventilate the structure.
This project was installed in 7 working days without the use
of a crane or any high reach equipment. |
|
This
structure was one of many units deployed during operation Enduring
Freedom. The hangar is designed to enclose sensitive aircraft
and personnel from intense heat and dust. This structure is
cooled by a 60 ton chiller and maintains low relative humidity.
One end is accessed by a 120ft wide x 16ft clear winch door.
The rear end is fixed and outfitted with equipment and personnel
doors. This building was deployed to the site within 7 days
of the receipt of order. The structure was fully operational
within 20 days ARO. Field technicians are available to support
installations worldwide. |
| |
|
|
 |
| South
Carolina |
|
|
|
 |
| Florida |
|
|
| Big
Top Sunshades and weather protection hangars are the standard
for flight line aircraft. Individual hangars are positioned
so that pilots can perform "start up-n-go" operation. In addition,
maintenance personnel are completely shaded which increases
morale and helps with job function. These three sunshades were
originally constructed at the Ogden, UT facility and relocated
after the 2002 Olympics. The ability to relocate our structures
offers our clients complete flexibility to configure and reconfigure
our products. Dimensions: 78ft wide x 80ft long x 34ft center
height. |
|
Big
Top was approached by the Navy to provide enclosures for the
maintenance of the #2 Catapult on the USS Kennedy. Our solution
consisted of 25 crane-liftable segments that were installed
end-to-end to fully enclose the catapult system on the Kennedy.
Workers can still access all points along the project by moving
an individual segment with the crane. The entire system was
shipped on two 48ft flatbeds. After this project the system
will be relocated to Norfolk for a project scheduled in 2004.
Dimensions: 19'7x30x16x12sw.
 |
 |
| Fort
Riley, KS |
|
|
|
 |
| Fort
Riley, KS |
|
|
Vehicle
inspection shelters/canopies are temporary solutions to heightened
base security. These structures will be used until permanent
facilities are completed. Recently, we have installed these
shelters with electrical lighting and lightning protection
systems. These systems allow the inspection process to continue
daylight or dark during inclement weather. Dimensions: 33x30x20x15sw.
See more Vehicle
Inspection Shelters
|
|
Lightning
protection kits are available for all military
post protection sheds. Force protection will often specify
grounding or lightning protection is included with the
assembly. The entire security patrol booth can be covered
with multilane models or one area for inspection can be
installed adjacent to main traffic lanes. These shelters
can be rapidly installed and deployed to remote locations.
Most inspection shelters can be installed in less than
one day per gate or post. Traffic can be diverted to other
lanes or gates during the assembly period which minimizes
disruption to guards marshal or military police. Some of
these structures have been used for actual guard shacks
and posts. In addition, X-ray equipment can be enclosed
at port authority facilities.
|
